6110B
- John Deere Tech 4.5l PTE engine
- Cab & OOS
- Up to 24/12 Hi-Lo Transmission
- 2560mm long wheelbase
Specifications | ||
---|---|---|
John Deere 6110B
|
Rated Engine Power, hp (kW) | 110 (81) | |
---|---|---|
Max Engine Power, hp (kW) | 114 (83) | |
Constant Power Range [rpm] | 1800 - 2200 | |
Type | John Deere PTE with High-Pressure Common Rail | |
Cylinder / Displacement [l] | 4 / 4,5 | |
Aspiration | Turbocharged / Intercooled | |
Engine Air Filter | PowerCore® G2 Air Filter with Pre-Cleaning | |
Fuel Tank (L) | 220 |
12X4 DC TSS 30K (OOS) | Optional | |
---|---|---|
12X4 WC TSS 40K (CAB) | Optional | |
12X12 WC TSS 30K PR with 6x6 Creeper (CAB & OOS) | Optional | |
24X12 WC TSS 40K HLPR (CAB & OOS) | Standard |
Type | Open-Center with optional Pressure Compensated Flow Control | |
---|---|---|
Rear Selective Control Valves | 3 SCV (CAB), 2 or 3 SCV (OOS) | |
Flow @ Rated Engine Speed [l/min] | 60/76 |
Rear Hitch Category | 2 / Ball or Hook Type | |
---|---|---|
Rear Hitch Max Lift Capacity @ Hitch Ball, kg | 5300 | |
Rear PTO with Mechanical Control & Dry Clutch | Standard (OOS) | |
Rear PTO with Electrical Control & Wet Clutch | Standard (CAB), Optional (OOS) | |
Rear PTO Shaft Type | 6-Spline 540 rpm / 21-Spline 1.000 rpm (Reversible Stub Shaft) | |
Front Hitch / PTO | Optional via LAFORGE | |
Drawbar | Cat. II with Hammer Strap / 1,900 kg vertical load | |
Wagon Hitch | Cat. II with 31 mm Pin / 1,900 kg Vertical Load (Field Installed Kit) |
Connectivity & AutoTrac Universal | JDLink Capable / JDLink M Modem & Field Installed Kit ATU |
---|
Wheelbase [mm] | 2560 | |
---|---|---|
Length x Height [mm] (OOS)* | 4835 x 2965 | |
Length x Height [mm] (CAB)* | 4835 x 2740 | |
Ground Clearance [mm] - (MFWD center) | 457 | |
Shipping Weight [kg] (OOS) | 4250 | |
Shipping Weight [kg] (CAB) | 4400 |
Front Tires | 380/85 R24 | |
---|---|---|
Rear Tires | 420/85 R38 |