23202320 Utility Tractor
• 17.7 kW (24.1 hp) Yanmar liquid-cooled engine.
• Weight 753 kg (1,660 lb.).
• 137 cm (54 in.) and 157.5 cm (62 in.) drive over mower deck.
• Standard folding ROPS and cruise control.
Specs & Compare | ||
---|---|---|
John Deere 2320 2320 Utility Tractor |
Manufacturer | Yanmar 3TNV76 | |
---|---|---|
Engine power (gross) | 97/68/EC rated power | |
Aspiration | Natural | |
Cylinders/displacement | 1.115 L 3 / 68 cu in. | |
Cylinder liners | Cast-in-block | |
Bore and stroke | 76 x 82 mm 2.99 x 3.23 in. | |
Compression ratio | 23.4:1 | |
Lubrication | Pressurized | |
Cooling system | Water pump | |
Air cleaner | Dry-type, two stage | |
Engine torque at rated speed | 54.6 Nm 40.27 lb-ft | |
Fuel tank capacity | 23; NA L 6.1; NA U.S. gal. |
Battery size | 500 CCA | |
---|---|---|
Alternator (12-V) | 20 amp | |
Starter size | 1.2 kW 1.6 hp |
Fuel consumption | 6.1 L/hr 1.6 U.S. gal./hr |
---|
Standard transmission; forward/reverse | Hydro; 2 Range | |
---|---|---|
Left-hand reverser | No | |
Final drive | Spur gear | |
Brakes | Wet disk | |
Steering | Power steering | |
Axle capacity | Front - 880 kg 1940 lb Rear - 1100 kg 2426 lb | |
Creeper | No |
Type | Open Center | |
---|---|---|
Pump rated output | 21.2 L/min 5.6 gpm Steering - 8.5 L/min 2.2 gpm Implement - 12.7 L/min 3.4 gpm | |
Pump type | Gear | |
Maximum operating pressure | 2421 psi | |
Draft control sensing | Position Control | |
Remote control valves available | 2 |
Category | Category I | |
---|---|---|
Lift capacity, 24-in. behind link arms | 522 kg 1150 lb |
Standard | Standard Rear @ 540 RPM and Mid @ 2100 RPM std. | |
---|---|---|
Control | Independent | |
Clutch | Wet disk | |
Brake (for mid and rear PTO) | Wet disk |
Crankcase with filter | 3.2 L 3.4 qt |
---|
Type | Spur Gear | |
---|---|---|
Differential lock | Yes |
Rollover protective structure | OSHA, SAE, ASAE Type - Foldable | |
---|---|---|
Platform - flat/straddle | Flat | |
Gear shift location - console/floor | Left hand Side |
Wheelbase | 1600 mm 63.0 in. | |
---|---|---|
Front axle clearance | 318.4 mm 12.5 in. | |
Turning radius with brakes | 2.04 m 6.7 ft | |
Turning radius without brakes | 2.34 m 7.7 ft | |
Approximate shipping weight (open-station; cab) | 753; N/A kg 1660; N/A lb |