8800A TerrainCut™Rough, Trim & Surrounds Mower
- TechControl™ Display locks in performance, and uptime
- LoadMatch™ to maintain cut quality
- 27% more hp, 20 percent more torque in the mowing circuit
- Final Tier 4 without sacrificing horsepower
Specs & Compare
| Specs & Compare | ||||
|---|---|---|---|---|
| John Deere 8800A TerrainCut™ Rough, Trim & Surrounds Mower |
Key Specs
| Maximum rated horsepower | At 2800 rpm ISOC: 41.1 kW 55.1 hp |
|||
|---|---|---|---|---|
| Drive pump | Tandem gear pump | |||
| Ground pressure | 82.7-124 kPa 12-18 psi |
|||
| Throttle | Automatic controls with AutoPedal™ foot controls; manual control through TechControl display | |||
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | |||
| Mowing speed | 0-12.8 km/h 0-8 mph |
|||
| Total width of cut | 53.3 cm 21 in. |
|||
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) | 4572 m/min 15,000 fpm |
Engine
| Type | Direct Inject Turbocharged Diesel | |||
|---|---|---|---|---|
| Compliant emission regulation | United States and Canada Tier 4 | |||
| Horsepower | Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW 55.1 hp |
|||
| Cylinders | Four | |||
| Displacement | 2.091 L 127.6 cu in. |
|||
| Air cleaner | 2-stage dry element | |||
| Fuel | Diesel up to B20 compliant | |||
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
Vehicle
| Drive pump | Tandem gear pump | |||
|---|---|---|---|---|
| Cutting units drive | Direct-coupled hydraulic gear motor | |||
| Hydraulic system capacity | 45.4 L 12 U.S. gal. |
|||
| Fuel tank capacity | 61.7 L 16 U.S. gal. |
|||
| Steering | Hydraulic power with dual rod, double acting steering cylinder | |||
| Front drive tires | 26x12-12 Multi Trac | |||
| Steering tires | 20x12X10-8 turf | |||
| Ground pressure | 82.7-124 kPa 12-18 psi |
|||
| Brakes | Electric Switch on Command Arm for Internal Wet Disk Brakes | |||
| ROPS | Standard, meets ISO 21299 standards |
Controls
| Throttle | Automatic controls with AutoPedal™ foot controls; manual control through TechControl display | |||
|---|---|---|---|---|
| Forward/reverse | 2-pedal | |||
| Mower lift | One-touch single handle | |||
| Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes | |||
| Seat | Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment | |||
| PTO | Electric Switch on Command Arm | |||
| Tilt steering | Left Foot operated for easy adjustment | |||
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | |||
| Storage | Cup holder; two-way radio; large operator storage located on left hand side of operator station |
Dimensions
| Height with ROPS | 2.24 m 88 in. |
|||
|---|---|---|---|---|
| Length | 3.38 m 133 in. |
|||
| Transport width | 2.21 m 87 in. |
|||
| Mowing position width | 2.23 m 88 in. |
|||
| Ground speed | Mowing 0-12.8 km/h 0-8 mph Transport 0-20.12 km/h 0-12.5 mph Reverse 9.6 km/h 6 mph |
Cutting Units
| Total width of cut | 53.3 cm 21 in. |
|||
|---|---|---|---|---|
| Height of cut | Construction 10 gauge 3.4 mm 0.1345 in. Steel with front skid plate No tool adjustment: 2.54-10.2 cm 1-4 in. |
|||
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) | Rollers Rear: 7.6 cm Rear: 3 in. Front: Two: diameter: 10.2 cm Front: Two: diameter: 4 in. Wide: 12.7 mm Wide: 5 in. 4572 m/min 15,000 fpm |
Sound levels
| Operator ear full engine | 91 dBA | |||
|---|---|---|---|---|
| Measuring standard | ISO 11201 |
Fuel Economy
| Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality | 25% load: 3.63 L/hr 0.96 gph 40% load: 5.64 L/hr 1.49 gph 50% load: 6.85 L/hr 1.81 gph |
|---|
Warranty
| Type | Two-year limited |
|---|
Certification
| Type | ANSI B71.4-2012. |
|---|
Shop and Buy
Maintenance and Support
Equipment models, features, options, attachments and prices may vary in different locations. Please contact your local John Deere dealer for details. John Deere has the sole discretion to review and adjust the specifications, model features and prices of John Deere parts. Before operating the vehicle, you are required to carefully read and strictly follow the safety instructions provided in any product/operator/service manual for the vehicle.
Actual vehicle top speed may vary based on belt wear, tire selection, vehicle weight, fuel condition, terrain and other environmental factors. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Variation may exist between the actual operation data and defaulted data for the horsepower and torque. Please refer to the original engine manufacturer’s website for detailed information. Optional accessories and attachments are not included in the standard warranty claim for reimbursement. The product (including its components) and accessories may not be available in all regions.