7700APrecisionCut™ Fairway Mower
- TechControl™ Display locks in performance, and uptime
- Set mowing turn speed to reduce scuffing
- AutoPedal™ lowers fuel consumption and noise
- Final Tier 4 without sacrificing horsepower
Specs & Compare
| Specs & Compare | ||||
|---|---|---|---|---|
| John Deere 7700A PrecisionCut™ Fairway Mower |
Key Specs
| Maximum rated horsepower | At 2800 rpm ISOC: 31 kW At 2800 rpm ISOC: 41.6 hp |
|||
|---|---|---|---|---|
| Drive pump | Tandem gear pump | |||
| Ground pressure | 69 kPa 10 psi |
|||
| Throttle | Automatic controls with AutoPedal™ foot controls; manual control through TechControl display | |||
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | |||
| Mowing speed | 0-12.8 km/h 0-8.0 mph |
|||
| Cutting unit size | Quick Adjust QA7: 55.9 cm 22 in. |
|||
| Total width of cut | 254 cm 100 in. |
|||
| Reel diameter | 17.8 cm 7 in. |
|||
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) | 10 Blade: 1.06 mm/km/h 10 Blade: 0.067 in./mph 8 Blade: 1.33 mm/km/h 8 Blade: 0.084 in./mph |
Engine
| Type | Direct Inject Turbocharged Diesel | |||
|---|---|---|---|---|
| Compliant emission regulation | United States and Canada Tier 4 | |||
| Horsepower | Maximum rated horsepower At 2800 rpm ISOC: 31 kW At 2800 rpm ISOC: 41.6 hp |
|||
| Cylinders | Three | |||
| Displacement | 1.568 L 95.69 cu in. |
|||
| Air cleaner | 2-stage dry element | |||
| Fuel | Diesel up to B20 compliant | |||
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
Vehicle
| Drive pump | Tandem gear pump | |||
|---|---|---|---|---|
| Hydraulic system capacity | 37.8 L 10 U.S. gal. |
|||
| Fuel tank capacity | 60.6 L 16 U.S. gal. |
|||
| Steering | Hydraulic power with double acting steering cylinder | |||
| Front drive tires | 26.5x14-12 turf | |||
| Steering tires | 20x12X10-8 turf | |||
| Ground pressure | 69 kPa 10 psi |
|||
| Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system | |||
| ROPS | Standard; meets ISO 21299 Standard |
Operating weight
| Cutting units lowered | 1202 kg 2650 lb |
|---|
Controls
| Throttle | Automatic controls with AutoPedal™ foot controls; manual control through TechControl display | |||
|---|---|---|---|---|
| Forward/reverse | 2-pedal | |||
| Mower lift | One-touch single handle | |||
| Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes | |||
| Seat | Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment | |||
| PTO | Electric Switch on Command Arm | |||
| Tilt steering | Left Foot operated for easy adjustment | |||
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | |||
| Storage | Cup holder; two-way radio; large operator storage located on left hand side of operator station |
Dimensions
| Height with ROPS | 224 cm 88 in. |
|||
|---|---|---|---|---|
| Length | 323 cm 127 in. |
|||
| Transport width | 287 cm 113 in. |
|||
| Mowing position width | 295 cm 116 in. |
|||
| Ground speed | Mowing 0-12.8 km/h 0-8.0 mph Transport 0-18.5 km/h 0-11.5 mph Reverse 0-6.4 km/h 0-5 mph |
Cutting Units
| Number | Five | |||
|---|---|---|---|---|
| Size | Quick Adjust QA7: 55.9 cm 22 in. |
|||
| Total width of cut | 254 cm 100 in. |
|||
| Height of cut | Ten-blade QA7: 6.3-50.8 mm Ten-blade QA7: 0.25-2.0 in. Eight-blade QA7: 6.3-50.8 mm Eight-blade QA7: 0.25-2.0 in. |
|||
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) | Rollers Front and rear: 7.6 mm 3 in. 10 Blade: 1.06 mm/km/h 10 Blade: 0.067 in./mph 8 Blade: 1.33 mm/km/h 8 Blade: 0.084 in./mph |
|||
| Reel diameter | 17.8 cm 7 in. |
Sound levels
| Measuring standard | ISO 11201 | |||
|---|---|---|---|---|
| Attachments installed | FTCs, reels engaged |
Fuel Economy
| Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality | 25% load: 2.8 L/hr 0.75 gph 40% load: 4.32 L/hr 1.14 gph 50% load: 5.22 L/hr 1.38 gph |
|---|
Warranty
| Type | Two-year limited |
|---|
Certification
| Type | ANSI B71.4-2012. |
|---|
Shop and Buy
Maintenance and Support
Equipment models, features, options, attachments and prices may vary in different locations. Please contact your local John Deere dealer for details. John Deere has the sole discretion to review and adjust the specifications, model features and prices of John Deere parts. Before operating the vehicle, you are required to carefully read and strictly follow the safety instructions provided in any product/operator/service manual for the vehicle.
Actual vehicle top speed may vary based on belt wear, tire selection, vehicle weight, fuel condition, terrain and other environmental factors. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Variation may exist between the actual operation data and defaulted data for the horsepower and torque. Please refer to the original engine manufacturer’s website for detailed information. Optional accessories and attachments are not included in the standard warranty claim for reimbursement. The product (including its components) and accessories may not be available in all regions.