C1 200Combine Harvester
- John Deere PowerTech™ 6.8l Engine
- Tier 3/Stage IIIA
- 136kw/185hp
- 400l
Specs & Compare
| Specs & Compare | ||||
|---|---|---|---|---|
| John Deere C1 200 Combine Harvester |
Engine
| Type | John Deere PowerTech™ 6.8l Engine | |||
|---|---|---|---|---|
| Emission level | Tier 3/ Stage IIIA | |||
| Rated power | 136kw/185hp | |||
| Fuel tank capacity | 400l |
Feederhouse
| Conveyor chains quantity | 3 |
|---|
Threshing Cylinder
| Diameter | 610mm (rasp-bar type) | |||
|---|---|---|---|---|
| Wrapping angle | 118° | |||
| Threshing speed range | 140 – 400rpm(with reduction gearbox)/350 – 1000rpm(without reduction gearbox) |
Separate Rotor
| Rotor length | 3300mm | |||
|---|---|---|---|---|
| Separator rotor diameter | 500mm |
Cleaning Shoe
| Total cleaning area | 3.4m² |
|---|
Grain Tank
| Capacity | 5500l | |||
|---|---|---|---|---|
| Unloading auger swing range | 110° | |||
| Standard unloading system at peak performance | 75l/s | |||
| Discharge height | 4.1m |
Residue Management
| Rotating knives / stationary knives quantity | 40/39 |
|---|
Ground Drive
| Transmission | Mechanical 4 speed | |||
|---|---|---|---|---|
| Maximum speed | 21km/h |
Tire Size
| Front tire | 23.1-26 R1 (2WD); 23.1-26 R2 (4WD); 28L-26 R2 (4WD) | |||
|---|---|---|---|---|
| Rear tire | 12.00-18 R1 (2WD);14.9-24 R2 (4WD) |