6095B
- John Deere Tech 4.5l PTM engine
- Cab & OOS
- Up to 24/12 Hi-Lo Transmission
- 2310mm long wheelbase
Specifications | ||||
---|---|---|---|---|
John Deere 6095B
|
Rated Engine Power, hp (kW) | 95 (70) | |||
---|---|---|---|---|
Max Engine Power, hp (kW) | 96 (71) | |||
Constant Power Range [rpm] | 2000 -2200 | |||
Type | John Deere PTM | |||
Cylinder / Displacement [l] | 4 / 4,5 | |||
Aspiration | Turbocharged / Intercooled | |||
Engine Air Filter | Std Air Filter | |||
Fuel Tank (L) | 160 |
12X4 DC TSS 30K (OOS) | Optional | |||
---|---|---|---|---|
12X4 WC TSS 40K (CAB) | Optional | |||
12X12 WC TSS 30K PR with 6x6 Creeper (CAB & OOS) | Optional | |||
24X12 WC TSS 40K HLPR (CAB & OOS) | Standard |
Type | Open-Center with optional Pressure Compensated Flow Control | |||
---|---|---|---|---|
Rear Selective Control Valves | 3 SCV (CAB), 2 or 3 SCV (OOS) | |||
Flow @ Rated Engine Speed [l/min] | 50/60/76 |
Rear Hitch Category | 2 / Ball or Hook Type | |||
---|---|---|---|---|
Rear Hitch Max Lift Capacity @ Hitch Ball, kg | 4060 | |||
Rear PTO with Mechanical Control & Dry Clutch | Standard (OOS) | |||
Rear PTO with Electrical Control & Wet Clutch | Standard (CAB), Optional (OOS) | |||
Rear PTO Shaft Type | 6-Spline 540 rpm / 21-Spline 1.000 rpm (Reversible Stub Shaft) | |||
Front Hitch / PTO | Optional via LAFORGE | |||
Drawbar | Cat. II with Hammer Strap / 1,900 kg vertical load | |||
Wagon Hitch | Cat. II with 31 mm Pin / 1,900 kg Vertical Load (Field Installed Kit) |
Connectivity & AutoTrac Universal | JDLink Capable / JDLink M Modem & Field Installed Kit ATU |
---|
Wheelbase [mm] | 2310 | |||
---|---|---|---|---|
Length x Height [mm] (OOS)* | 4655 x 2915 | |||
Length x Height [mm] (CAB)* | 4655 x 2690 | |||
Ground Clearance [mm] - (MFWD center) | 407 | |||
Shipping Weight [kg] (OOS) | 4020 | |||
Shipping Weight [kg] (CAB) | 4170 |
Front Tires | 320/85 R24 | |||
---|---|---|---|---|
Rear Tires | 420/85 R34 |